|
|
| |
|
|
| Products¡úPacking |
|
 |
| PLS-850F KEVLAR FIBER PACKING(NA) |
| Technical data |
| Temperature |
-200¡æ--280
¡æ |
| Pressure |
200Bar |
| Velocity |
25m/s |
| PH rang |
2-13 |
|
| |
Kevlar fiber braided packing is made of DU Pont's Kevlar
yarn impregnated with PTFE dispersion and processed with lubricant, braided
into square cross section. As the strength and module of Kevlar is as high
as the steel-like strength.So this packing compared with other kinds of
braided packing, they can resist more serve media and higher pressure. It
can be installed separately or as end rings with other kinds of packing
to combine different characteristics into packing set. This packing is mainly
used as substitute of asbestos in pump systems. Its property is better than
asbestos and it covers all the service ranges which asbestos packing provides
and more. Under very bad conditions where ordinary asbestos packing can
not provide the satisfied effect. But this packing has long service. It
is usually applied to pulp factory, sand slurry, tin mine and feed water
pump of power. |
|
| |
| | |
